aboutsummaryrefslogtreecommitdiff
path: root/mubios/include/bios.h
Commit message (Collapse)AuthorAgeFilesLines
* [mubios] Derive the E820 map from the CMOS memory sizeRichard Qin21 hours1-0/+2
| | | | | | | | | | The E820 map ended the usable region at a hardcoded 0x08000000, so a guest with more RAM had the extra memory reported as reserved and ran out of memory during initramfs unpacking. Add cmos_read8() and size the extended memory entry from CMOS registers 0x34 and 0x35, falling back to the 16 MiB units in 0x30 and 0x31 and then to the previous 128 MiB end when neither is programmed.
* [mubios] Initialize the 8042 keyboard controllerRichard Qin21 hours1-0/+1
| | | | | | | | | | | | | | | POST only unmasked IRQ1 in the PIC and never configured the 8042 itself, so the keyboard stayed in its post-reset disabled state: the clock was inhibited and no scan code ever reached the output buffer. IRQ1 never fired, the BDA keyboard buffer stayed empty, and GRUB polling INT 16h AH=01h never saw a key. Add kbd_init() to disable both ports, drain the output buffer, clear the clock inhibit bits in the command byte, enable the keyboard and auxiliary IRQs and select set 1 translation, then enable scanning with 0xF4. The IRQ1 handler now checks the status register for a pending output byte before reading the data port and drops auxiliary port bytes. The set 2 break prefix tracking is gone because translation is enabled.
* [mubios] Initialize VGA mode and serial BIOS servicesRichard Qin42 hours1-0/+2
|
* [mubios] Add CHS disk services and multi-sector PIO readsRichard Qin42 hours1-0/+1
|
* [mubios] Add EDD parameters and normalize PS/2 inputRichard Qin43 hours1-0/+2
|
* [mubios] Implement INT 16h Keyboard ServiceRichard Qin3 days1-0/+1
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Implement INT 15h E820hRichard Qin3 days1-0/+1
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Multi-sector INT 13h AH=42hRichard Qin3 days1-1/+1
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Add Interrupt Dispatch ServiceRichard Qin3 days1-0/+1
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Add C implementation of INT 10hRichard Qin3 days1-0/+5
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Add ATARichard Qin3 days1-0/+2
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Enable IRQ0Richard Qin3 days1-0/+1
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Create 16-bit entry points for IRQ0/IRQ1 and install the IVT vectors.Richard Qin3 days1-0/+2
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Implement the PIC and PIT.Richard Qin3 days1-0/+3
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Implement the COM1 serial port driver and POST output.Richard Qin3 days1-0/+4
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Initialize IVT, BDA and EBDA.Richard Qin3 days1-1/+17
| | | | Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
* [mubios] Building a 32-bit C entry in protected modeRichard Qin3 days1-0/+27
Signed-off-by: Richard Qin <richard.qin.x@gmail.com>
generated by cgit v1.2.3 (git 2.46.0) at 2026-11-10 13:10:34 +0000