Remove old code

Signed-off-by: Richard Qin <richard.qin.x@gmail.com>

4 files changed, 0 insertions, 629 deletions

diff --git a/arch/riscv/kernel/asm-offsets.c b/arch/riscv/kernel/asm-offsets.c
deleted file mode 100644
index edecab7..0000000
--- a/arch/riscv/kernel/asm-offsets.c
+++ /dev/null
@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-// Copyright (C) 2026 Richard Qin
-//
-// arch/riscv/kernel/asm-offsets.c — emit struct field offsets and
-// scalar constants for consumption by assembly sources (head.S etc.).
-//
-// 1:1 with Linux arch/riscv/kernel/asm-offsets.c.  The Makefile
-// compiles this to an .s file (not .o) and runs
-// scripts/extract-asm-offsets.sed over the output to produce
-// include/generated/asm-offsets.h.
-//
-// Adding a new offset: include the struct's header, add an OFFSET()
-// or DEFINE() line below, rebuild.  head.S can then reference the
-// generated #define directly.
-
-#include <lume/kbuild.h>
-#include <lume/kernel_map.h>
-
-void asm_offsets(void)
-{
-    COMMENT("LumeOS asm-offsets — struct kernel_mapping field offsets");
-    OFFSET(KERNEL_MAP_VIRT_ADDR,            kernel_mapping, virt_addr);
-    OFFSET(KERNEL_MAP_VIRT_OFFSET,          kernel_mapping, virt_offset);
-    OFFSET(KERNEL_MAP_PHYS_ADDR,            kernel_mapping, phys_addr);
-    OFFSET(KERNEL_MAP_SIZE,                 kernel_mapping, size);
-    OFFSET(KERNEL_MAP_VA_PA_OFFSET,         kernel_mapping, va_pa_offset);
-    OFFSET(KERNEL_MAP_PAGE_OFFSET,          kernel_mapping, page_offset);
-    OFFSET(KERNEL_MAP_VA_KERNEL_PA_OFFSET,  kernel_mapping, va_kernel_pa_offset);
-}
diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
deleted file mode 100644
index e04c44c..0000000
--- a/arch/riscv/kernel/head.S
+++ /dev/null
@@ -1,317 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/* Copyright (C) 2026 Richard Qin */
-
-/*
- * RISC-V kernel entry — Linux-aligned layout.
- *
- * Flow (mirrors arch/riscv/kernel/head.S in Linux):
- *
- *   _start                          [.head.text, byte 0 of image]
- *     · 64-byte Boot Protocol Image Header
- *     · j real_start
- *
- *   real_start                      [.text]
- *     · save a0 (hartid) / a1 (dtb_pa)
- *     · setup gp / per-hart sp
- *     · BSP/AP election via amoswap
- *     · BSP:   clear BSS, call setup_vm, then relocate_enable_mmu
- *     · AP:    spin-wait, then relocate_enable_mmu
- *
- *   relocate_enable_mmu  [C function, arch/riscv/mm/init.cc]
- *     · csrw satp <- trampoline_pg_dir
- *     · jump to higher-half VA
- *     · csrw satp <- early_pg_dir
- *     · slide sp/ra/gp to higher-half
- *     · call relocate_kernel  (walks .rela.dyn, patches R_RISCV_RELATIVE)
- *
- *   real_start (continued in higher-half)
- *     · BSP only: call early_cpp_init (walks .init_array)
- *     · call kernel_main(hartid, dtb_pa)
- *
- * Register contract from OpenSBI / U-Boot:
- *   a0 = hart ID
- *   a1 = FDT physical base
- */
-
-#include <lume/config.h>
-
-#define PAGE_OFFSET     0xFFFFFFC000000000
-#define BOOT_STACK_SIZE 8192
-
-/* ========================================================================
- * .head.text — RISC-V Boot Protocol Image Header
- *
- * Layout per Documentation/arch/riscv/boot-image-header.rst:
- *   code0/code1 (8 B)  : executable code, lands at PC after OpenSBI hand-off
- *   text_offset (8 B)  : load offset from RAM base
- *   image_size  (8 B)  : effective image size (0 = unknown)
- *   flags       (8 B)  : bit 0: endian
- *   version     (4 B)  : major.minor
- *   res1/res2   (4+8)  : reserved
- *   magic       (8 B)  : "RISCV\0\0\0"
- *   magic2      (4 B)  : "RSC\x05"
- *   res3        (4 B)  : PE/COFF reserved
- * ======================================================================== */
-    .section .head.text, "ax"
-    .globl _start
-_start:
-    j       real_start              /* code0 */
-    .word   0                       /* code1 */
-    .dword  0x200000                /* text_offset */
-    .dword  0                       /* image_size (post-link) */
-    .dword  0                       /* flags */
-    .word   0x0002                  /* version 0.2 */
-    .word   0                       /* res1 */
-    .dword  0                       /* res2 */
-    .dword  0x5643534952            /* magic "RISCV\0\0\0" */
-    .word   0x05435352              /* magic2 "RSC\x05" */
-    .word   0                       /* res3 */
-
-/* ========================================================================
- * real_start — all harts land here at physical PC
- * ======================================================================== */
-    .text
-    .globl real_start
-real_start:
-    /* DEBUG: 'R<hartid>\n' — UART direct at 0x10000000, MMU off. */
-    li      t0, 0x10000000
-    li      t1, 'R'
-    sb      t1, 0(t0)
-    addi    t1, a0, '0'
-    sb      t1, 0(t0)
-    li      t1, '\n'
-    sb      t1, 0(t0)
-
-    /* Mask interrupts and supervisor pending bits. */
-    csrw    sie, zero
-    csrw    sip, zero
-
-    /* gp for medany — relax must be disabled across the `la`. */
-    .option push
-    .option norelax
-    la      gp, __global_pointer$
-    .option pop
-
-    /* per-hart boot stack: sp = boot_stack + (hartid + 1) * STACK_SIZE */
-    la      t0, boot_stack
-    li      t1, BOOT_STACK_SIZE
-    addi    t2, a0, 1
-    mul     t1, t1, t2
-    add     sp, t0, t1
-
-    /* Save hartid / dtb_pa in callee-saved regs preserved across calls. */
-    mv      tp, a0                  /* tp = hartid */
-    mv      s0, a1                  /* s0 = dtb_pa */
-
-    /* BSP/AP election: first hart to swap bsp_elected 0→1 is BSP. */
-    la      t0, bsp_elected
-    li      t1, 1
-    amoswap.w.aq t2, t1, (t0)
-    bnez    t2, .Lap_wait           /* prev != 0 → we're an AP */
-
-    /* === BSP path === */
-    la      t0, bsp_hart_id
-    sw      a0, 0(t0)
-
-    li      t3, 0x10000000
-    li      t4, 'B'
-    sb      t4, 0(t3)
-    li      t4, '\n'
-    sb      t4, 0(t3)
-
-    /* Clear BSS — must precede setup_vm, which writes kernel_map. */
-    la      t0, _sbss
-    la      t1, _ebss
-.Lbss_loop:
-    bgeu    t0, t1, .Lbss_done
-    sd      zero, 0(t0)
-    addi    t0, t0, 8
-    j       .Lbss_loop
-.Lbss_done:
-
-    li      t3, 0x10000000
-    li      t4, 'V'
-    sb      t4, 0(t3)
-    li      t4, '\n'
-    sb      t4, 0(t3)
-
-    /* ---- BSP-only: pre-MMU PIC fixup of .rela.dyn ----
-     *
-     * The kernel is built with -fPIE -shared.  All global-data accesses
-     * compile to GOT-indirect loads (auipc + ld), where the linker
-     * emits each .got slot's initial value as the link-time VA and a
-     * companion R_RISCV_RELATIVE entry in .rela.dyn.  At this point
-     * we're running at the physical load address — those link-time VAs
-     * are not yet mapped, so any global access would fault.
-     *
-     * Walk .rela.dyn in pure assembly (PC-relative only — no globals)
-     * and patch every R_RISCV_RELATIVE slot to addend + (PA - LINK_VA).
-     * After this, setup_vm can dereference kernel_map / early_pg_dir
-     * / etc. via the GOT and get correct PA-side pointers.
-     *
-     * Mirrors Linux arch/riscv/kernel/head.S — same idea, same loop.
-     *
-     *   reloc:
-     *     t0 = pa_offset = PA(_start) - KERNEL_LINK_ADDR  (negative)
-     *     t1 = &__rela_dyn_start
-     *     t2 = &__rela_dyn_end
-     *     for each 24-byte rela in [t1, t2):
-     *         t3 = r_offset; t4 = r_info; t5 = r_addend
-     *         if (t4 & 0xFFFFFFFF) != R_RISCV_RELATIVE: skip
-     *         slot_pa = r_offset + pa_offset
-     *         *slot_pa = r_addend + pa_offset
-     */
-#define R_RISCV_RELATIVE 3
-
-    la      t0, _start                  /* PA of _start */
-    li      t1, 0xFFFFFFC080200000      /* KERNEL_LINK_ADDR (asm/page.h) */
-    sub     t0, t0, t1                  /* t0 = pa_offset (PA - LINK_VA) */
-
-    la      t1, __rela_dyn_start
-    la      t2, __rela_dyn_end
-.Lrela_loop:
-    bgeu    t1, t2, .Lrela_done
-    ld      t3, 0(t1)                   /* r_offset */
-    ld      t4, 8(t1)                   /* r_info */
-    ld      t5, 16(t1)                  /* r_addend */
-    /* r_info low 32 bits = type */
-    li      t6, 0xFFFFFFFF
-    and     t4, t4, t6
-    li      t6, R_RISCV_RELATIVE
-    bne     t4, t6, .Lrela_next
-    /* slot_pa = r_offset + pa_offset */
-    add     t3, t3, t0
-    /* value = r_addend + pa_offset */
-    add     t5, t5, t0
-    sd      t5, 0(t3)
-.Lrela_next:
-    addi    t1, t1, 24                  /* sizeof(Elf64_Rela) */
-    j       .Lrela_loop
-.Lrela_done:
-
-    /* Memory fence so subsequent loads see the patched slots. */
-    fence   w, r
-
-    li      t3, 0x10000000
-    li      t4, 'P'
-    sb      t4, 0(t3)
-    li      t4, '\n'
-    sb      t4, 0(t3)
-
-    /* Call setup_vm(load_pa = PA of _start, dtb_pa = s0).
-     * Both args physical at this point — MMU still off. */
-    la      a0, _start
-    mv      a1, s0
-    call    setup_vm
-
-    li      t3, 0x10000000
-    li      t4, 'v'
-    sb      t4, 0(t3)
-    li      t4, '\n'
-    sb      t4, 0(t3)
-
-    /* Release APs once page tables are built. */
-    la      t0, boot_sync_flag
-    li      t1, 1
-    amoswap.w.rl zero, t1, (t0)
-    j       .Lenable_mmu
-
-/* ========================================================================
- * AP path — spin until BSP signals readiness.
- * ======================================================================== */
-.Lap_wait:
-    la      t0, boot_sync_flag
-.Lap_spin:
-    lw      t1, 0(t0)
-    beqz    t1, .Lap_spin
-    fence   r, rw
-
-    /* fall through */
-
-/* ========================================================================
- * .Lenable_mmu — all harts: enable MMU, jump to higher-half, run reloc.
- *
- * relocate_enable_mmu does its own SATP write + higher-half jump in
- * C (with inline asm), then calls relocate_kernel.  After it returns,
- * we are at higher-half VA with sp / ra / gp slid up, and .rela.dyn
- * is applied (so .init_array pointers are valid).
- * ======================================================================== */
-.Lenable_mmu:
-    la      a0, early_pg_dir
-    call    relocate_enable_mmu
-    /* On return: PC, sp, ra, gp are all at higher-half VA. */
-
-    li      t3, 0x10000000
-    li      t4, 'M'
-    sb      t4, 0(t3)
-    li      t4, '\n'
-    sb      t4, 0(t3)
-
-    /* Mark MMU enabled for console / pmap layers that check this. */
-    call    console_set_mmu_enabled
-
-    /* BSP only: walk __init_array and call each C++ ctor. */
-    la      t0, bsp_hart_id
-    lw      t0, 0(t0)
-    bne     tp, t0, .Lskip_cpp_init
-    call    early_cpp_init
-.Lskip_cpp_init:
-
-    /* Hand off to kernel_main(hartid, dtb_pa). */
-    mv      a0, tp
-    mv      a1, s0
-    call    kernel_main
-
-    /* kernel_main should not return. */
-.Lhalt:
-    csrc    sstatus, 2
-    wfi
-    j       .Lhalt
-
-/* ========================================================================
- * early_cpp_init — walk .init_array and call each constructor.
- *
- * Called only by BSP, after relocate_kernel has patched the function
- * pointers stored in __init_array.  Before relocate_kernel runs those
- * pointers are zero-filled by the linker.
- * ======================================================================== */
-    .globl early_cpp_init
-early_cpp_init:
-    addi    sp, sp, -32
-    sd      ra, 0(sp)
-    sd      s1, 8(sp)
-    sd      s2, 16(sp)
-
-    la      s1, __init_array_start
-    la      s2, __init_array_end
-.Linit_loop:
-    bgeu    s1, s2, .Linit_done
-    ld      t0, 0(s1)
-    jalr    ra, t0
-    addi    s1, s1, 8
-    j       .Linit_loop
-.Linit_done:
-    ld      ra, 0(sp)
-    ld      s1, 8(sp)
-    ld      s2, 16(sp)
-    addi    sp, sp, 32
-    ret
-
-/* ========================================================================
- * Election state — in .data so explicit zero survives the BSP BSS clear
- * (these are read before BSS is cleared on the BSP, and concurrently by
- * APs while BSP is in the clear loop).
- * ======================================================================== */
-    .section .data
-    .align  2
-    .globl  boot_sync_flag
-boot_sync_flag:
-    .word   0
-
-    .globl  bsp_elected
-bsp_elected:
-    .word   0
-
-    .globl  bsp_hart_id
-bsp_hart_id:
-    .word   0
diff --git a/arch/riscv/kernel/lumeos.lds.S b/arch/riscv/kernel/lumeos.lds.S
deleted file mode 100644
index 9bd083b..0000000
--- a/arch/riscv/kernel/lumeos.lds.S
+++ /dev/null
@@ -1,120 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/* Copyright (C) 2026 Richard Qin */
-
-/*
- * RISC-V Kernel Linker Script Template
- *
- * This is a C-preprocessed linker script (.lds.S). The build system
- * runs it through CPP to produce the final vmlinux.lds which is
- * passed to the linker.
- *
- * Architecture-specific definitions:
- *   - OUTPUT_ARCH, ENTRY
- *   - PAGE_OFFSET, BASE_ADDRESS, PHYS_BASE
- *   - .head.text placement
- *   - GP anchor (__global_pointer$ for RISC-V medany)
- *   - early_pgdir and boot stacks in .bss
- *
- * Common section macros come from include/lume/vmlinux.lds.h
- *
- * Reference: docs/specs/linker_and_entry.md
- */
-
-#include <lume/lumeos.lds.h>
-
-/* ===== RISC-V Architecture Constants ===== */
-
-OUTPUT_ARCH(riscv)
-
-PAGE_OFFSET  = 0xFFFFFFC000000000;
-BASE_ADDRESS = 0xFFFFFFC080200000;
-PHYS_BASE    = 0x80200000;
-
-ENTRY(_start)
-
-/* ===== RISC-V: GP anchor in .data (medany model) ===== */
-#define ARCH_DATA_EXTRA                         \
-    . = ALIGN(16);                              \
-    PROVIDE(__global_pointer$ = . + 0x800);     \
-    *(.sdata .sdata.*)
-
-/* ===== RISC-V: page-table storage + per-CPU boot stacks in .bss =====
- *
- * Linux RISC-V layout (arch/riscv/kernel/vmlinux.lds.S):
- *   early_pg_dir       — first early page table built by setup_vm,
- *                        used for the rest of boot after MMU enable
- *   trampoline_pg_dir  — single-page table used only during the SATP
- *                        switch from physical to higher-half VA; its
- *                        identity + virt mappings of _start must both
- *                        be valid in the same instruction window
- *   fixmap_pg_dir      — covers the FIXADDR_START range used by the
- *                        early console (UART MMIO before kernel page
- *                        table proper is built)
- *
- * All three are allocated here so head.S can take their addresses without
- * a C definition; their PA == VA mapping covers them during setup_vm.
- */
-#define ARCH_BSS_EXTRA                          \
-    . = ALIGN(4096);                            \
-    early_pg_dir = .;                           \
-    . += 4096;                                  \
-    trampoline_pg_dir = .;                      \
-    . += 4096;                                  \
-    fixmap_pg_dir = .;                          \
-    . += 4096;                                  \
-    /* Legacy name retained for any caller still referencing it; */ \
-    /* points at the same first 4 KiB as early_pg_dir. */            \
-    early_pgdir = early_pg_dir;                 \
-    /* Per-CPU boot stacks: 8KB per CPU, max 8 CPUs */              \
-    . = ALIGN(4096);                            \
-    boot_stack = .;                             \
-    . += 8192 * 8;                              \
-    boot_stack_top = .;
-
-/* ===== Layout ===== */
-
-SECTIONS {
-    . = BASE_ADDRESS;
-
-    /* .head.text: Image Header (must be at byte 0 of the kernel image) */
-    .head.text : AT(PHYS_BASE) {
-        _start = .;
-        KEEP(*(.head.text))
-    }
-
-    TEXT_SECTION
-
-    . = ALIGN(4096);
-
-    /* .rela.dyn lives between .text and .rodata so it ends up in the
-     * read-only PT_LOAD segment.  Mirrors Linux vmlinux.lds.S where
-     * .rela.dyn sits at the tail of init data, just before RO_DATA. */
-    RELA_DYN_SECTION
-
-    . = ALIGN(4096);
-
-    RODATA_SECTION
-
-    . = ALIGN(4096);
-
-    DATA_SECTION
-
-    . = ALIGN(8);
-
-    /* .got lives right after .data in the RW PT_LOAD.  All other
-     * dynamic-linker artefacts (.plt, .dynamic, .dynsym, .dynstr,
-     * .hash, .gnu.hash, .interp, .dynbss) are discarded by the
-     * DISCARDS macro — mirrors Linux arch/riscv/kernel/vmlinux.lds.S. */
-    GOT_SECTION
-
-    . = ALIGN(4096);
-
-    /* End of file-backed image (BSS follows as NOBITS) */
-    __lume_image_end = .;
-
-    BSS_SECTION
-
-    KERNEL_END
-
-    DISCARDS
-}
diff --git a/arch/riscv/kernel/signal.cc b/arch/riscv/kernel/signal.cc
deleted file mode 100644
index 39fe34e..0000000
--- a/arch/riscv/kernel/signal.cc
+++ /dev/null
@@ -1,163 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/* Copyright (C) 2026 Richard Qin */
-
-/*
- * arch/riscv/signal.cc — Signal frame construction and sigreturn
- *
- * Constructs a signal frame on the user stack before returning to
- * the user signal handler. On sigreturn, restores the original
- * registers from the saved frame.
- *
- * Frame layout on user stack (grows downward):
- *
- *   +-----------------------+  <- original sp
- *   |  sigset_t saved_mask  |   8 bytes
- *   |  TrapFrame saved_regs |   296 bytes
- *   |  kernel_siginfo info  |   128 bytes
- *   +-----------------------+  <- new sp (16-byte aligned)
- *
- * Reference: Linux arch/riscv/kernel/signal.c
- */
-
-#include <lume/signal.h>
-#include <lume/signal_types.h>
-#include <lume/signal_nr.h>
-#include <lume/task.h>
-#include <lume/uaccess.h>
-#include <lume/errno.h>
-#include <lume/klog.h>
-#include <arch/trapframe.h>
-
-/* ================================================================== */
-/*  Signal frame layout                                               */
-/* ================================================================== */
-
-struct rt_sigframe {
-    kernel_siginfo info;          /* siginfo for SA_SIGINFO handlers */
-    arch::TrapFrame saved_regs;   /* saved register state */
-    sigset_t        saved_mask;   /* blocked mask to restore on sigreturn */
-};
-
-/* ================================================================== */
-/*  Signal trampoline (written to user stack)                         */
-/* ================================================================== */
-
-/*
- * When the user's signal handler returns (via `ret`), ra points here.
- * This tiny code sequence invokes sys_rt_sigreturn to restore the
- * original execution context.
- *
- * RISC-V instructions (8 bytes):
- *   li  a7, 139    →  addi a7, zero, 139  →  0x08b00893
- *   ecall           →  0x00000073
- */
-static constexpr uint32 sigreturn_trampoline[2] = {
-    0x08b00893,  /* li a7, 139 (SYS_rt_sigreturn) */
-    0x00000073,  /* ecall */
-};
-
-/* ================================================================== */
-/*  setup_signal_frame                                                */
-/* ================================================================== */
-
-int setup_signal_frame(arch::TrapFrame* tf, int signo,
-                       kernel_sigaction* ka, kernel_siginfo* info)
-{
-    TaskControlBlock* curr = current_task();
-    if (!curr) return -EINVAL;
-
-    /* Calculate frame location on user stack */
-    uint64 sp = tf->sp;
-
-    /* Reserve space for the trampoline below the frame */
-    sp -= sizeof(sigreturn_trampoline);
-    sp &= ~15ULL;  /* 16-byte align */
-    uint64 trampoline_addr = sp;
-
-    /* Reserve space for the signal frame */
-    sp -= sizeof(rt_sigframe);
-    sp &= ~15ULL;  /* 16-byte align */
-    uint64 frame_addr = sp;
-
-    /* Build the frame in kernel memory, then copy to user stack */
-    rt_sigframe frame{};
-    if (info) {
-        frame.info = *info;
-    }
-    frame.saved_regs = *tf;
-    frame.saved_mask = curr->blocked;
-
-    /* Copy frame to user stack */
-    int err = copy_to_user(frame_addr, &frame, sizeof(frame));
-    if (err < 0) return -EFAULT;
-
-    /* Copy trampoline to user stack */
-    err = copy_to_user(trampoline_addr, sigreturn_trampoline,
-                       sizeof(sigreturn_trampoline));
-    if (err < 0) return -EFAULT;
-
-    /* Set up the trap frame to execute the signal handler */
-    tf->epc = ka->sa_handler;
-    tf->sp  = frame_addr;
-
-    /* Arguments to the handler: handler(int signo, siginfo_t*, ucontext_t*) */
-    tf->a[0] = static_cast<uint64>(signo);
-
-    if (ka->sa_flags & SA_SIGINFO) {
-        /* SA_SIGINFO: pass siginfo and ucontext pointers */
-        tf->a[1] = frame_addr;                                /* &info */
-        tf->a[2] = frame_addr + sizeof(kernel_siginfo);       /* &saved_regs (as ucontext) */
-    } else {
-        tf->a[1] = 0;
-        tf->a[2] = 0;
-    }
-
-    /* Return address: when the handler does `ret`, jump to trampoline */
-    if (ka->sa_flags & SA_RESTORER) {
-        tf->ra = ka->sa_restorer;
-    } else {
-        tf->ra = trampoline_addr;
-    }
-
-    return 0;
-}
-
-/* ================================================================== */
-/*  arch_sigreturn — restore state from signal frame                  */
-/* ================================================================== */
-
-int64 arch_sigreturn(arch::TrapFrame* tf)
-{
-    TaskControlBlock* curr = current_task();
-    if (!curr) return -EINVAL;
-
-    /*
-     * The signal frame is located at the current sp.
-     * We need to read it back and restore the original state.
-     */
-    uint64 frame_addr = tf->sp;
-
-    rt_sigframe frame{};
-    int err = copy_from_user(&frame, frame_addr, sizeof(frame));
-    if (err < 0) {
-        printk(KERN_ERR "sigreturn: failed to read signal frame at %llx\n",
-               frame_addr);
-        task_kill_current(SIGSEGV);
-        return -EFAULT;
-    }
-
-    /* Restore the saved register state */
-    *tf = frame.saved_regs;
-
-    /* Restore the blocked mask */
-    curr->blocked = frame.saved_mask;
-    curr->blocked.del(SIGKILL);
-    curr->blocked.del(SIGSTOP);
-
-    /*
-     * Return value: we return the saved a0 from the original context.
-     * The syscall dispatch will NOT overwrite a0 because sigreturn
-     * is special — it returns via the restored trap frame directly.
-     */
-    return tf->a[0];
-}